Crazepony Drones - SPK Drones

Crazepony 2pcs USB Charger Cable 1A with XH-3P Connector for Hosim Q903 Q905 Axial SCX10 2S 7.4V LiPo Battery RC Car Rock Crawler FPV Drone Quadcopter

    Features:
  • The LiPo Battery USB Charger Cable has indicator, IC protection circuit
  • Input: DC 5V, Output current: 1000mA
  • Suit for 7.4V Lipo battery XH-3pin plug, it take 4 hours to charge full. (It is not recommended to use this charger with a battery below 500mah)
  • Intelligent protection:overload protection, over-voltage protection,overcharge protection
  • Charging: Green Light Flash, Red Light Solid; Full Charged: Green and Red Light all Solid; Alarm: Red Light Flash Quickly
More...

Upgraded 2PCS USB Charger Cable 2A Power Adapter Charging Wire XH-3Pin Connector for 2S 7.4V LiPo Battery RC Quadcopter FPV Drone RC Boat

    Features:
  • * Input: DC 5V; Output current: 2000mA Faster charging. Only thake 4 hours to charge full
  • * Automatic detection of battery voltage, improve battery using life and charge balance
  • * USB charger cable suitable for 7.4V lipo battery XH-3pin plug, compatible with rc quadcopter fpv drone and rc boat
  • * Charging: green light flash, red light solid; Full Charged: green light and red light all solid; Alarm: red light flash quickly
  • * This USB drone charger cable uses intelligent IC protection circuit to prevent overcharge, short circuit, reverse connection and over-voltage
More...

Crazepony F450-V2 Drone Frame Kit 4-Axis Airframe 450mm Quadcopter Frame Kit with Landing Skid Gear

    Features:
  • ★Ultra high strength material:Built from quality glass fiber and polyamide nylon.It is resistant to falling and impact.
  • ★Fast and secure installation: Integrated PCB connections for direct soldering of your ESCs, make your esc, power supply and other wiring more quickly and safely.
  • ★Bright appearance: Pre-threaded brass sleeves for all of the frame bolts. Colored arms for orientation to keep you flying in the right direction.
  • ★Easy assembly: Large mounting tabs on main frame bottom plate for easy camera mounting.
  • ★Specially framework designed: increase flight stability while minimizing power loss
More...

4pcs 550mAh 1S Battery 3.8V HV LiPo Battery 50C with JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus Micro FPV Racing Drone Like Tiny 8X Mirarobot S85 Whoop Tiny7 Snapper7

    Features:
  • This 550mAh 1S battery with the connector of JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • This Crazepony 1S Lipo Battery discharge rate is 50C, Small size of 57*17.6 mm, Light weight of 12.55g, you can get 5-7 min of flight time and more power while staying at a suitable weight
  • Crazepony 1s 550mah battery is customed for Inductrix FPV Plus, Tiny 8X, Mobula 7, Snapper7, Armor 85 Plus, Whoovers, Mirarobot S85 Whoop and Tiny Whoop FPV Racing Drones.(NOT for Inductrix FPV)
  • As a FPV battery, Don't over-charge, or over-discharge batteries. Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction
  • Note: The rate flight times is heavily dependent on how hard you fly and how far you like to discharge your batteries
More...

4pcs 650mAh 1S Battery 3.8V HV LiPo Battery 60C with JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone

    Features:
  • This 650mah 1S lipo fits well into many FPV Racing Drones, including but not limited to the Inductrix FPV Plus Mobula 7 Eachine M80 Beta75Pro Mobula 7 HD
  • This FPV 1S battery is with the larger capacity of 650mAh, Small size of 59 * 16 * 7.5 mm, Light weight of 14.58g/pcs
  • GN3 650mah 1S battery has a PH2.0 connection like most all Whoop sized batteries, so it should connect to most all Micro FPV Drone
  • Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction
  • Note: As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water
More...

Crazepony 16pcs Gemfan 4032 (Popo) 3-Blade Propellers 4 inch Flash Props Match for 1406-2205 1806 Brushless Motor for FPV Drone Racing Frame

    Features:
  • Good Material : Material is dash-and-bending-resistant and leads to the best efficiency durability.
  • Standard Size: This 4032 3 inch propeller is lighter enough, good for your FPV.
  • Enough Power:This paddle is very violent, the wind area is large, the root to strengthen the bombing, mini wear competition, practice preferred.
  • Support Motor and FPV Frame: Suitable for 1406 1806 2205 brushless motor.
  • Colorful color:16pcs 5144 Propellers CW CCW (4pcs Clear Blue, 4pcs Clear Red, 4pcs Clear Black, 4pcs Fluorescent yellow).
More...

Crazepony 4pcs DX2205 2300KV Brushless Motor 2CW 2CCW 2-4S Lipo for FPV Racing Drone Quadcopter QAV210 X220 QAV250 (Gold)

    Features:
  • D2205 2300KV Brushless Motor material: Stainless steel motor shaft, Long life Japanese NMB ball bearings, Oxygen free copper wire, CNC machined aluminum case, More powerful
  • This motor can support 2-4s lipo, more powerful and better faster
  • Each of motor just 28.8g,a set just 115.2g, so it is more lighter
  • The motor mount hole size is M3 and the shaft diameter is M5
  • This motor works ,support 190-260MM FPV Racing Quadcopter, 5 inch props perfect
More...

Crazepony Spotter V2 Micro FPV AIO Camera 5.8G with OSD Integrated Mic FOV170 Degree 700TVL Video Transmitter 40CH 20MW-200MW Adjustable VTX for Mini FPV RC Drone

    Features:
  • New TOP RC Hobby Spotter, this is a micro all in one FPV camera and video transmitter
  • The video transmitter adjustable 20MW and 200MW, operate on 40 different channels and will work with most popular FPV goggles on the market such as FatShark googles
  • Wide-angle 170 degree 700 TVL camera with a microphone, make your fpv experience more real, more exciting
  • Light weight: 9g, suitable for indoor and outdoor fpv drone
  • Cloverleaf antenna: better receive signal, unibody design.
More...

Crazepony 4pcs 650mAh 1S Battery 3.8V/4.35V HV LiPo Battery JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone Like Mobula 7 Beta75Pro

    Features:
  • This 650mah 1S lipo fit for Inductrix FPV Plus FPV Racing Drones
  • Crazepony 1S Lipo Battery with the connector of JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • This Inductrix FPV Plus Battery discharge rate is 50C, Small size of 63 * 16 * 7 mm, Light weight of 13.68g, you can get 5-7 min of flight time and more power while staying at a suitable weight
  • Newly developed chemistry 1S Battery, Much more Safer, higher quality and more powerful rate gives you higher speed flying experience
  • Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction
More...

Crazepony 4pcs EMAX RS2205 2300KV Brushless Motor 3-4S 2CW 2CCW for QAV250 QAV300 FPV Racing Drone Quadcopter

    Features:
  • High Quality Guarantee:The new standard of EMAX RS2205-S 2600KV Brushless Motor is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust.
  • Update Version:Compared to the RS2205, maintain the RS2205 2600KV Brushless Motor's advantage, and 2 grams lighter than the first version of the RS2205,and the new RS225-S cranks out another +100g of thrust.
  • Size and Design:This have a weight Approx 30g with a normal size-0.87*0.2 inch. 2205-S 2600KV Brushless Motor is no difference between CW and CCW.
  • More Power:By utilizing N52SH curved magnets, the pulling force between the stator and magnet is greatly increased
  • Support Your Racing Drone:This 2205S 2600KV brushless motor is perfect for your 210 220 250 280 FPV racing drone quadcopter, and suitable for 5 inch propellers like 5030 5035 5045 props
More...