GARTT Drones - SPKDrones Shop

GARTT Drones - SPK Drones

GARTT 2 Pairs ML2205S 2300KV Brushless Motor 3-4S for RC Mini Racing Drones QAV 210 250 300 FPV Quadcopter Frame

Cooling Series Bell Design reduces motor temperature by at least 20%.
Highest Grade n50sh Neodymium magnets, Genuine Japanese NMB Bearings.
Each Motor is Dynamically Balanced in the factory.
12.5mm Extended Prop Shaft allows virtually any prop with 5mm hole.
1 year warranty and friendly customer service.

GARTT 4pcs Z 2205S 2300KV Brushless Motor CW/CCW Red 3-4S for FPV 210 250 300 Drones QAV Quadcopter

for FPV 210 250 300 Drones QAV Quadcopter

GARTT 2 Pairs ML2204S 2300KV Brushless Motor CW CCW 3-4S for RC FPV Drones QAV 180 210 250 300 Mini Quadcopter

Cooling Series Bell Design reduces motor temperature by at least 20%.
Highest Grade n50sh Neodymium magnets, Genuine Japanese NMB Bearings.
Each Motor is Dynamically Balanced in the factory.
11.5mm Extended Prop Shaft allows virtually any prop with 5mm hole.
1 year warranty and friendly customer service.

GARTT 4pcs Z 2204S 2300KV Brushless Motor CW/CCW Green for FPV 210 250 300 Drones QAV Quadcopter

GARTT 4pcs Z 2204S 2300KV Brushless Motor CW/CCW Green

GARTT 2 Pairs QE2205C 2300KV Brushless Motor 3-4S for FPV Racing Mini Drones QAV250 Quadcopter

Cooling Series Bell Design reduces motor temperature by at least 20%.
Highest Grade n50sh Neodymium magnets, Genuine Japanese NMB Bearings.
Each Motor is Dynamically Balanced in the factory.
13.5mm Extended Prop Shaft allows virtually any prop with 5mm hole.
Package includes: 2 x QE2205C Brushless Motor CW; 2 x QE2205C Brushless Motor CCW

GARTT ML8318 100KV high Power Motor for 3080 porps multicopter Drone UAV

ML8318 100KV
high power Motor
3080 porps multicopter Drone UAV

GARTT ML 3510 700KV Brushless RC Motor for Multicopter Quadcopter Hexacopter RC Drone

High magnetic energy NdFeB magnet steel-N45SH with 150 degrees heat-resistant.
To support the high speed(up to 15000 spin), we used the Imported Japanese NMB Bearing and HRC55 degrees stainless steel Axis.
Using the heat-resistant varnished wire enwinding the motor coil, 600mm weld wire(extra-soft silicone wire) can be cut optionally.
Each rotor was balanced with high speed,ensure the motor high-speed runnung without shake.
The vane-type design can reduce motor temperature with a big cloud of steam.

GARTT 4PCS ML2206S 2400KV 2CW 2CCW Brushless Motor 3S-4S for RC FPV Drones QAV 210 250 300 Mini Quadcopter Multicopter

Cooling Series Bell Design reduces motor temperature by at least 20%.
Highest Grade n50sh Neodymium magnets, Genuine Japanese NMB Bearings.
Each Motor is Dynamically Balanced in the factory.
12.5mm Extended Prop Shaft allows virtually any prop with 5mm hole.
1 year warranty and friendly customer service.

GARTT 2 Packs YPG 4S 14.8V 1500mAh 70C LiPo Battery with XT60 Plug For RC Mini Racing Drone FPV Quadcopter, Perfect For 210 Quad Frame, Eachine Wizard x220, 250 Racer, AR Drone 2.0, Walkera F210, etc.

【Dimension】 (L*W*H):2.75×1.34×1.30 inch/70×34×33 mm, Weight:6.87oz/195g±2g
【Voltage Note】 Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using.
【Applications】 RC airplane, helicopter, car, truck, boat, drones (Only if the voltage, dimension and the plug match, then it will fit).
【What you get】YPG 1500mAh 4S 14.8V 70C lipo battery deans XT60 connector with 1 year warranty and friendly customer service.
【Use and Maintenance】 Supports up to 5C charge with balance, charge 7.5A for this battery. Note that all lithium batteries are not store more than 2 days with high pressure (full charge), the high pressure of storage easily lead to battery swell, damage the battery performance and life! It is recommended to store the battery for a long time: Discharge the battery to 3.8V of each cells.

GARTT 4PCS ML3508 370KV Brushless Motor for RC FPV Drones Quadcopter Hexacopter Multirotor

GARTT ML3508 370KV 3508 Brushless Motor For RC Multi-rotor Quadcopter Hexacopter Drone