LEACO Drones - SPK Drones

Airbot Omnibus AIO F4 V6 Flight Control - 5xUARTs Using F4 MCU Controls OSD Over SPI Bus for Quadcopter Drone LEACO

  • ✨✨✨✨✨Included 1 pcs 7mm JST cable
  • C incl. 5V1A BEC on board(3-6s) and 1x 8V BEC for Camera
  • MPU6000 at SPI bus, Ext, SPI for damped gyro OSD Configuration has been incl. in Betaflight GUI.
  • Use fireworks v2 firmware, in CLI, set gyro_to_use = SECOND
  • New version with 8PIN Sh1.0 Socket, could be much easier connect to our 4in1 ESC by one cable

Airbot Omnibus F4 Nano v7 AIO Flight Control for FPV Based on F405 MCU Supports 6X UART for Quadcopter Drone leaco

  • ✨✨✨✨✨Included 1 pcs 7mm JST cable
  • Tantalum Capacitors added for noiseless gyro reading;Solder pads added for SmartAudio and Camera Control (next to Video pads)
  • STM32 F405 MCU, Runs Betaflight firmware
  • Supports Lipo direct plugin (3-6S) Supports 5V 1A BEC output (Buck)
  • STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD) More UARTs 25x25mm (20x20mm M3 mount holes)

Micro Alien 3inch 135mm one Plate Bottom Mini Quadcopter Frame Drone

  • weight:3inch(33 grams)
  • top plate :1.5mm thickness bottom plate:3mm thickness
  • arms width:9mm arms thickness:3mm
  • FC hole:20x20mm 16x16mm
  • camera:19mm micro camera height for FC:23mm

Acro 164mm 3inch Frame kit RC FPV Carbon Fiber Light Weight Racing Quadcopter Drone LEACO

  • Motor to Motor (diagonal) = 164mm Motor to Motor (front to back/side to side) = 115mm
  • Overall Frame size = 141x141mm Dry Frame Weight = 52.4g
  • Motor bolt pattern = 12x12mm Motor c-clip hole = 6mm
  • standoff:23mm

LEACO Johnny 3inch 140mm with 3mm Thickness Arm Frame Kit Quadcopter Drone kit Carbon Fiber

  • Wheelbase: 140mm Material: Carbon fiber
  • Bottom plated: 1.5mm thickness Top plated:1.5mm thickness Side plated:1.5mm thickness
  • Standoff:23mm Weight: 30g
  • FC hole:20x20mm Camera size:19mm

1 Pieces Short TBS Triumph Team Blacksheep VAS 5.8GHz Circular Polarized Triumph Antenna Black Sheep for FPV Racing Drone

  • Manufactured and tested to highest standards
  • Best in class range and signal quality
  • Extra compact and low weight
  • Ultrasonically welded and foam infused cover for ultimate crash-protection
  • Double-jacket semi-rigid cable for heavy impact resistance

Q90 90mm 90 Carbon Fiber Frame Kit Mini Light for Indoor Interior RC FPV Cross Racing Drone Quadcopter with 1935 Propeller

  • Wheelbase: 90mm
  • Material: Carbon fiber
  • Weight: about 11.9g
  • Bottom plate thickness: 2.3mm
  • Top plate thickness: 2.3mm

Scarab 3inch 130mm with 3mm Arm Carbon Fiber X Type Frame Quadcopter for Mini FPV Racing Drone

  • Wheelbase: 130mm;Structure: X typ
  • Weight: 31G;Thickness: Arm 3.0mm, other accessories 1.5m
  • Paddle: 3.0 inch paddle;Flight control hole distance: 20 * 20mm
  • Camera mounting width: 20mm
  • Motor: 9 * 12mm

The Legend of Zelda Twilight Princess & Hylian Shield & Master Sword finest collection sets keychain / necklace / jewelry series (Red-10set)

  • 100% New
  • Material: Alloy, this collection box would be an excellent gift for any fan of Zelda
  • Size: 3-9CM,100% brand new & high quality
  • The nice necklace set,perfect for your to decorate.
  • Ships in 2-5 business days,100% Satisfaction Guaranteed.

LEACO Eyas 55 7mm / 8mm Pure Carbon Fiber Brush Coreless Quadcopter Frame 85mm for DIY FPV Micro Indoor Mini Drone with Camera (for 7mm Motor)

  • Wheelbase: 85mm
  • Weight: about 9g
  • Upper board: 1.5mm
  • Bottom plate: 1.5mm